SEARCH RESULTS

THERE’S NOTHING HERE... The link you followed may be broken, or the page might have moved. BACK TO HOMEPAGE

WARRANTIES MANUFACTURER WARRANTY DOWNLOAD (PDF) RAILINGS Coatings American Structures & Design, Inc. (AS&D) warrants all coatings, including anodized, baked enamel, and powder, conditionally for a period of one year from the date of purchase against adhesion failure, blistering, cracking, or peeling under the conditions of normal use. This warranty does not cover scratches, abrasions, acts of God, acts of nature, or damage from chemicals of any type to the surfaces. AS&D does not warranty its coatings if the products are used within one (1) mile of salt water. Materials AS&D warrants materials and hardware for one year. The materials warranty is null and void if the product has been abused, used improperly, or used beyond the design limitations of the product. This warranty applies only if the AS&D products have been installed per approved installation instructions and is null and void if installed incorrectly. Assessment of claim At our discretion, AS&D reserves the right to inspect the product under claim at either the customer’s location or at our manufacturing facility. AS&D reserves the right to have the product returned to our manufacturing facility for full inspection. Shipping and handling costs will be the responsibility of the claimant. AS&D reserves the right to either replace the product or repair the product and will not cover any cost related to disassembling or reinstallation of materials. PATIO COVERS Full Warranty American Structures & Design, Inc. (AS&D) warrants that its Patio Covers, Latices, Carports, Sunrooms, Screen Rooms when installed with proper engineering and permitting in accordance with local U.S. building codes and in conditions of ordinary wear for the lifetime of the product. ASD shall have one hundred twenty (120) days to repair any defects covered under this Full Warranty. In the event repair is not possible, ASD will either replace the defective products, or refund the full purchase price of the defective product. ASD reserves the right to discontinue or change the design or color of any of its products. If for a reason the original product is not available, ASD may substitute another product of comparable quality. Exclusions & Limitations; Claims Procedures ASD warranty does not cover any chipping, peeling, flaking or blistering of the products as the results of damage of any kind resulting from faulty or improper installation, accidental or intentional damage, settling, structural shrinkage or other distortion of the property structure, popping due to expansion or condensation, mildew accumulation, impact of foreign objects, rust or corrosion of any products, or the failure of the owner to provide reasonable maintenance of the product including periodic removal of dirt and pollution residue as necessary. Warranty does not include fading of any painted finish due to normal weathering, or any rust of any components of the products, including but not limited to, screws and other fasteners, and any steel components. Also, no warranty applies if the product has been painted or the surface has been altered. “Normal weathering” is defined as the damaging effects of sunlight and the extremes of weather and atmosphere that may cause any colored surface to fade or become soiled or stained. The degree to which normal weathering occurs depends on air quality, location and other local conditions. Fading of darker colors may occur more significantly than lighter colors in exposed sunlight and is considered “normal weathering”. CABLE PLIERS Cable Pliers are covered by a limited warranty for a period of one (1) year from the date of receipt to be free from defects due to defective materials or workmanship. The company’s obligations are limited to the replacement of the equipment found to be defective and does not cover any other related costs. To make a claim, the defective equipment shall be delivered to American Structures and Design with a written notice of the defect and evidence that the condition or product failure is covered by this warranty. CABLE CRIMPERS Cable Crimpers are covered by a limited warranty for a period of one (1) year from the date of receipt to be free from defects due to defective materials or workmanship. The company’s obligations are limited to the replacement of the equipment found to be defective and does not cover any other related costs. To make a claim, the defective equipment shall be delivered to American Structures and Design with a written notice of the defect and evidence that the condition or product failure is covered by this warranty. HYDRAULIC SWAGING EQUIPMENT Swager Models 650 and 610, including the air or electric activated pump supplied with the swager, are covered by a limited warranty for a period of one (1) year from the date of receipt to be free from defects due to defective materials or workmanship. ​ The company’s obligations are limited to the replacement of the equipment found to be defective and does not cover any other related costs. ​ To make a claim, the defective equipment shall be delivered to American Structures and Design with a written notice of the defect and evidence that the condition or product failure is covered by this warranty. STAINLESS STEEL HARDWARE AND CABLE Stainless steel hardware and cable are covered by a limited warranty for a period of ten (10) years from the date of receipt to be free from defects due to defective materials. This warranty does not cover materials which have been abused, neglected, or used in any manner other than for railings. Any damage, failure of corrosion resulting from environmental conditions, improper installation, vandalism, insurrection, war, or acts of nature. The company’s obligations are limited to the replacement of the materials found to be defective and does not cover any other related costs associated with the disassembly of the defective materials or the installation costs of replacement materials. To make a claim, the defective material shall be delivered to American Structures and Design with a written notice of the defect and evidence that the condition or product failure is covered by this warranty. AS&D CLEANING AND MAINTENANCE AS&D products and systems are fabricated with the highest-grade materials available on the market today. AS&D products are coated with baked enamel, powder or anodized finishes that are applied with industry leading application technology. Regular maintenance Inspect fasters and attachments on regular intervals. It is the responsibility of the owner to inspect these areas a minimum of once per year. Over time, fasteners may loosen and need to be tightened. Fasteners and hardware may discolor over time, but this does not affect the integrity or strength of the system. Natural weathering Over time, exposure to the elements might cause accumulation of pollens, pollutants, algae, or oxidation on the surface of the coating. This is normal and can be cleaned and polished to bring back the sheen. General cleaning AS&D products should be cleaned at least once per year with a mild, non-abrasive soap and water. We recommend using a soft sponge or microfiber wipe. In areas where salts and pollutants are more prevalent, the materials should be cleaned more frequently. Always rinse with fresh water after cleaning to remove any residual soap or buildup. Avoid using dry sponges or rags which will scratch the surface Always remove any sap, tree seeds, bugs or other contaminants as soon as possible, as prolonged exposure to the sun and heat will make them difficult to remove. Avoid using chemicals, household cleaners, or harsh abrasives on painted or anodized surfaces. For glass infill, use regular glass cleaner or soap and water. Always test a small, inconspicuous area before applying any product to AS&D materials. Non-transferrable warranty All AS&D’s warranties on coatings and materials is not assignable or transferrable. GLASS WARRANTY American Structures and Design (“ASD”) offers this Standard Limited Warranty (“Warranty”) on the below listed products and parts when used in accordance with applicable building codes and regulations, National Glass Association (NGA), Fenestration & Glazing Industry Alliance (FGIA) and ASTM International guidelines, standard industry practices and written instructions from ASD. This Warranty is offered to the original purchaser of one or more of the specific products listed below (“Original Purchaser”) and may not be transferred or assigned. EXCEPT AS OTHERWISE PROVIDED IN WRITING BY ASD, THIS WARRANTY IS OFFERED IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE WARRANTY STATES ASD’S ENTIRE AND EXCLUSIVE LIABILITY AND THE EXCLUSIVE REMEDY OF THE ORIGINAL PURCHASER FOR ANY CLAIM IN CONNECTION WITH THE PRODUCTS COVERED BY THE WARRANTY. This Warranty covers the following glass items supplied by ASD: Laminated Glass ASD warrants its laminated glass to be free of manufacturing defects resulting in material obstruction through the glass area and/or edge separation and changes in properties of the polyvinyl butyral, ethylene vinyl acetate or glass clad polycarbonate interlayer for a period of five (5) years from date of manufacture. Laminated glass is manufactured to comply with requirements listed in ANSI Z97.1, CPSC 16CFR1201 (Category I or II), and CAN/CGSB-12.1-M90. Heat Treated Glass ASD warrants its tempered and heat strengthened glass to meet the requirements of ASTM C1048 for a period of one (1) year from the date of manufacture. Tempered glass is manufactured to comply with requirements listed in ANSI Z97.1, CPSC 16CFR1201 (Category I or II), and CAN/CGSB-12.1-M90. Standard warranty terms for Heat Treated Glass are not applicable to Shower and Bath glass products. See referenced sections for coverage details. Tempered Laminated Glass ASD warrants its laminated glass to be free of manufacturing defects resulting in material obstruction through the glass area and/or edge separation and changes in properties of the polyvinyl butyral, ethylene vinyl acetate or glass clad polycarbonate interlayer for a period of five (5) years from the date of manufacture. Tempered Laminated glass is manufactured to comply with requirements listed in ANSI Z97.1, CPSC 16CFR1201 (Category I or II), and CAN/CGSB-12.1 M90. ASD does not warranty polyvinyl butyral, ethylene vinyl acetate or glass clad polycarbonate interlayer if a top rail was not used on the railing system. ASD warranties Safety Glass Plus interlayer for 5 years without a top rail installed. ​ ​ The following limited warranty terms and conditions apply to all Products: Warranty Claim Exclusive Remedies In an event where furnished parts are found to have failed to conform to the warranty described above, ASD will, at its option, replace the Product(s) for the purchaser without charge or refund the purchase price of said parts, as the exclusive remedy available under this Warranty. In the case where a part that needs replacement has been discontinued or is no longer available, ASD reserves the right to substitute comparable parts of equivalent function to replace the Product(s). In no event will ASD’s liability under this Warranty exceed the purchase price of the Product(s) purchased. ASD will bear no other expense, such as labor cost of any kind. ASD shall not be liable for any direct, indirect, special, incidental or consequential damages whatsoever, whether based on breach of express or implied warranty, breach of contract, negligence, strict liability, or any other legal theory. Any parts replaced under this warranty are limited to the original warranty period and shall not be extended beyond the original specified warranty term. ASD reserves the right to require inspection of Products that are alleged to be defective prior to administering a warranty claim remedy. This Warranty is void if Original Purchaser fails or refuses to provide or make reasonably available for inspection the allegedly defective Product(s) within a reasonable period of time, which shall not exceed thirty (30) days after written notice of the written claim. Claim Procedure In the event of a claim against this Warranty, the Original Purchaser shall promptly notify ASD as directed herein. If Original Purchaser fails to submit a written claim for warranty coverage within thirty (30) calendar days from the date it knew, or reasonably should have known, of the alleged defect covered by the Warranty, then Original Purchaser shall be deemed to have waived any claim for coverage under the Warranty, and ASD shall have no responsibility or liability with respect to such alleged defect(s). In no event shall a claim for warranty coverage be considered after the expiration of the specified warranty coverage period for the particular Product(s). Notice of a claim under ASD’s Limited Warranty must be provided via e-mail notification to ASD Customer Service with a copy of the original purchase order/invoice, proof of delivery of Product(s) purchased, and pictures demonstrating the defect. As set forth above, Original Purchaser must also make allegedly defective Product(s) reasonably available for inspection. Exclusions and Limitations This Warranty shall not cover or apply to: normal wear and tear; improper or negligent installation, tampering, neglect or any reason not related to defects in material or workmanship of the relevant parts; glass, hardware and insulating glass seal failure caused by acts of God (including, without limitation, fire, floods, extreme weather, earthquakes, crime, labor strikes, war, riots or social unrest, collectively “Acts of God”), an intervening cause or by any other cause whatsoever not within ASD’s exclusive control; failure due to mishandling, loading, unloading, storage, misuse, abuse, and improper installation, including failure to follow ASD’s installation instructions, and care and maintenance instructions (available at www.americanstructures.com ); scratches, abrasions, corrosion or delamination from the use of abrasive cleaners, solvents, acids, alkalis or any other chemicals used on or around the parts; applications where films, signs or similar devices have been applied to the surface of our products; incompatibility to other glazing or installation materials such as coatings, sealants, adhesives, setting blocks, lubricants, gaskets, insulation or any other related materials; installation of parts in a continuous or cyclical high moisture environment, including but not limited to a swimming pool, sauna or greenhouse enclosures; installation in a high vibration environment, including but not limited to motor vehicles, travel trailers, aircraft, watercraft and other mobile applications; inadequate or improper design, specification or usage; damage, failure or breakage caused by localized application of heat which causes excessive temperature differential over the glass surfaces or edges; applications where installation is performed by persons who are not qualified; laminated glass products installed which exceed 15 degrees from the vertical or which are installed with exposed edges; laminated glass glazed with materials which do not completely repel water for the life of the warranty, or with materials that deteriorate the architectural or security laminated glass products; glazing system applications without a weather seal that is impervious to water, or without a proper weep system; Interior partition and railing hardware finish failure caused by normal weathering, chalking, scratching, fading, corrosive atmospheric contaminates (e.g. chemical fumes, pollution), negligence, abuse, accident, shipping, improper use or installation, fire, flood, exposure to corrosive elements or Acts of God or other causes unrelated to defective materials or workmanship. Additional Terms and Conditions ASD reserves the right to charge for delivery of items covered by the Warranty. This Warranty will be void in the event that full payment is not received for goods and services within the agreed terms of sale. ​ This Warranty shall be governed by the laws of the State of Washington, excluding any conflict of law rules of such State. In the event of any dispute or legal action, such dispute or legal action shall be brought exclusively in the appropriate federal or state court sitting in Pierce Country, Washington, notwithstanding any claim of forum non conveniens. The prevailing party in any such action shall be entitled to receive all costs and reasonable attorneys’ fees, including on any appeals. All terms in this document that are defined or given meanings in the Uniform Commercial Code, as adopted in the State of Washington, will have the same definition and meaning for purposes of this document and sale of goods. CLEARLINE WARRANTY American Structures & Design, Inc. (AS&D) warrants its dealers, customers and subsequent purchaser and users, that the Clearline Bracket it supplies shall be free of material defects and defects in workmanship for a period of one (1) year from date of installation. This warranty will not apply if after inspection by AS&D, it is determined that the Clearline Bracket(s) has been installed and maintained in a manner that is not in conformity with the AS&D installation manual and the ICC/ES Report (ESR-4639). This warranty excludes product failure caused by normal weathering, chalking, scratching, fading, corrosive atmospheric contaminates (e.g. chemical fumes, pollution), negligence, abuse, accident, shipping, improper use or installation, fire, flood, exposure to corrosive elements or acts of God or other causes unrelated to defective materials or workmanship. AS&D does not warranty its products if used within one (1) mile of salt water. Coatings and Finishes American Structures & Design, Inc. (AS&D) warrants all coatings, including anodized, baked enamel, and powder, conditionally for a period of one year from the date of purchase against adhesion failure, blistering, cracking, or peeling under the conditions of normal use. This warranty does not cover scratches, abrasions, acts of God, acts of nature, or damage from chemicals of any type to the surfaces. Assessment of claim At our discretion, AS&D reserves the right to inspect the product under claim at either the customer’s location or at our manufacturing facility. AS&D reserves the right to have the product returned to our manufacturing facility for full inspection. Shipping and handling costs will be the responsibility of the claimant. AS&D reserves the right to either replace the product or repair the product and will not cover any cost related to disassembling or reinstallation of materials. The refund or replacement shall constitute the limit of AS&D’s liability and obligation for any material defect or defect in workmanship in a Glass Vice system. Non-transferable warranty AS&D’s warranty on coatings and materials is not assignable or transferrable. AS&D CLEANING AND MAINTENANCE AS&D products and systems are fabricated with the highest-grade materials available on the market today. AS&D aluminum products are coated with baked enamel, powder or anodized finishes that are applied with industry-leading application technology. Regular maintenance Inspect fasters and attachments on regular intervals. It is the responsibility of the owner to inspect these areas a minimum of once per year. Over time, fasteners may loosen and need to be tightened. Fasteners and hardware may discolor over time, but this does not affect the integrity or strength of the system. Natural weathering Over time, exposure to the elements might cause accumulation of pollens, pollutants, algae, or oxidation on the surface of the coating. This is normal and can be cleaned and polished to bring back the sheen. General cleaning AS&D products should be cleaned at least once per year with a mild, non-abrasive soap and water. We recommend using a soft sponge or microfiber wipe. In areas where salts and pollutants are more prevalent, the materials should be cleaned more frequently. Always rinse with fresh water after cleaning to remove any residual soap or buildup. ​ • Avoid using dry sponges or rags which will scratch the surface • Always remove any sap, tree seeds, bugs or other contaminants as soon as possible, as prolonged exposure to the sun and heat will make them difficult to remove. • Avoid using chemicals, household cleaners, or harsh abrasives on painted or anodized surfaces. • Glass infill: use regular glass cleaner or soap and water. • Always test a small, inconspicuous area before applying any product to AS&D materials.

INSTALLATION INSTRUCTIONS BALCONY BALCONY BRACKET BALCONY TYPE 1, 2, 3 BALCONY TYPE 4, 5 PATIO COVER PATIO COVER RAILING TR100/600: GLASS, PICKET, PERF INFILL TR100/600 STAIRS: GLASS, PICKET, PERF INFILL TR200/999: GLASS, PICKET, PERF INFILL TR200/999: CABLE INFILL TR400: GLASS, PICKET, PERF INFILL TR400: CABLE INFILL GATE INSTALLATION: ALL INFILLS MOUNTING ATTACHMENT DETAILS SUNSHADE SUNSHADE BRACKET INSTALLATION SUNSHADE FRAME INSTALLATION CABLE APPLICATION GUIDE FOR METAL POSTS CABLE INSTALLATION GUIDELINES CABLE BORING & MOUNTING GUIDES PRE-TENSIONER INSTALLATION INSTRUCTIONS

ALUMINUM RAILINGS REQUEST A QUOTE RAIL STYLES ROUND TOP TR100 FLAT TOP TR200 ADD-A-TOP TR400 SQUARE TOP TR600 ELLIPTICAL TOP TR999 CLEARLINE GLASS RAIL PROVEN COMMERCIAL PERFORMANCE The Danforth Zella Apartments High Point Village PROVEN RESIDENTIAL PERFORMANCE TR999 / Glass Infill TR200 / Cable Infill TR200 / Picket Infill

< Back Pull-Lock Post Types: Wood, Metal Fitting Types: Non-Tensioning, Swageless REQUEST A QUOTE The Pull-Lock® is a concealed, swageless, non-tensioning, through-the-post-mounted fitting that is suitable for use on level or pitched runs, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable. The Pull-Lock® must be used with a tensioning fitting on the opposite end of the run. This fitting is installed into a pre-drilled hole in the end post. Using the Pull-Lock® fitting on level or pitched runs requires that a minimum of 1-1/2” of clearance exists on the back side of the end post (to install the fitting and pull the cable through). It is also recommended that a stainless steel flat washer be installed between the shoulder of the fitting and the mating surface of the wood post (washer sold separately). The cable attaches to the fitting via our Push-Lock® locking wedge system which requires no special tools. You can use this fitting on a pitched application, using the same horizontally drilled method for 4×4 wood posts, by installing a post protector tube into the face of the post where the cable exits at an angle (the post protector tube protects the face of the post from abrasion and furrowing as the cable is tensioned). The post protector tube is sold separately. This fitting is very much like the Push-Lock®, except the cable passes through the Pull-Lock®, meaning you can just cut the excess cable where it exits the fitting – no need to measure the cable before cutting. For that reason, it is the more popular of the two. 1/8" CABLE PART NO. 3/16" CABLE PART NO. 1/4" CABLE PART NO. FRAME "F" FRAME "R" FRAME "P" "L" LENGTH CH-PUL-4-12 CH-PUL-6-12 NA 1-1/2" 1-1/2" 1-1/4" 1.562" CH-PUL-4-1.810 CH-PUL-6-1.810 CH-PUL-8-22 NA NA 1-1/2" 1.810" CH-PUL-4-2.030 CH-PUL-6-2.030 CH-PUL-8-32 2' 2' NA 2.030" CH-PUL-4-2.300 CH-PUL-6-2.300 NA NA NA 2" 2.300" CH-PUL-4-2.375 CH-PUL-6-2.375 NA 2-3/8" 2-3/8" NA 2.375" CH-PUL-4-3.030 CH-PUL-6-3.030 NA 3" 3" NA 3.030" CH-PUL-4-2.530 CH-PUL-6-2.530 NA 2-1/2" 2-1/2" 2-1/2" 2.530" CH-PUL-4-3.030 CH-PUL-6-3.030 NA 3-1/2" 3-1/2" 3" 3.030" CH-PUL-4-12 CH-PUL-6-12 NA 4" x 4" NA NA 1.562"

This elegant patio cover project features an AS&D Poly Panel design in a rich ebony color, seamlessly attached to the home. The sleek Poly Panel not only offers durability but also provides excellent protection from the elements while allowing natural light to filter through. ​ The attached style enhances the home’s architectural integrity, creating a stylish extension of the living space. This outdoor area is perfect for relaxation and entertaining, offering shade and shelter without sacrificing aesthetics. The striking ebony finish complements the home's exterior, adding a sophisticated touch to the overall design. This patio cover creates an inviting outdoor retreat, great for enjoying year-round. Style: Poly Panel Attachment Type: Attached Color: Ebony Location: Tacoma, WA Poly Panel | Tacoma, WA

FLAT TOP TR200 REQUEST A QUOTE INFILL OPTIONS Glass Infill Picket Infill Perforated/Mesh Infill Cable Infill Midrail Design (Works with all infill options) MOUNTING STYLE Surface Mount Fascia Mount Flush Mount Core Mount Knife Plate FINISH COLOR Black (Stock) White (Stock) Brown (Stock) Anodized Custom GALLERY RESOURCES Railing Installation Instructions Railing Installation Instructions (Stairs) Railing Overview

AS&D Product Scope: Railing Railing System / Infill: Flat Top TR200 and Square Top TR600 with Cable infill, TR600 with 1/8” Cable used on the stairs Location: West Linn, OR Construction Type: Residential, Renovation Private Residence Railing | West Linn, OR Located in a quaint backyard, this 40’ deck is installed with AS&D’s Flat Top TR200 railings, offering the residential deck a modern, earthy feel. Providing strong protection and a dramatic design appeal, the Flat Top TR200 railing was paired with sleek cable infill secured by surface mount posts. Stairs to the stone backyard pathway used AS&D’s Square Top TR600 railings for easy accessibility and maintenance, creating a unique outdoor space.

V-Pan | Yelm, WA Yelm Community Services Food Bank in Yelm, WA has a long history of providing their community with socioeconomic support programs, so American Structures and Design (AS&D) was proud to work with them to outfit their loading dock with a sleek V-Pan Patio Cover system. The V-Pan is a simple, no-nonsense design perfect for keeping workers and patrons out of the elements while loading and unloading. The cover is supported by 4x4 steel posts for optimal strength and easy maintenance. Style: V-Pan Location: Yelm, WA

6800 Roosevelt | Seattle, WA A new multi-family property in Seattle’s downtown district, 6800 Roosevelt is adorned with AS&D Aluminum Railings and Balcony Systems on the ground level and balconies. All stories feature AS&D’s sturdy Series 200 aluminum railing with picket infill and a black anodized finish. Contributing to LEED designation and complementing the building’s industrial design style, AS&D’s Aluminum Railings were easily installed and fabricated on site. With environmental benefits and sophisticated designs, AS&D Aluminum Railing Systems provide the necessary elements to enhance any project—with minimal maintenance over the life of the building. AS&D Product Scope: Railing and Balcony Systems Railing System / Infill: TR200 Flat Top Railing with Picket Infill Location: Seattle, WA Construction Type: Multi-Family, New

High Point Village | Enumclaw, WA Nestled in the city of Enumclaw, Washington, High Point Village offers residents a tranquil and refined lifestyle. Accented with AS&D powder-coated black balconies, High Point Village is a truly peaceful urban sanctuary. AS&D Series 200 Flat Top Aluminum Rails with black picket infill beautifully complement the building’s classic architectural details for a unique and contemporary aesthetic. With an unmatched fabrication process that produces a durable and uniform product, AS&D Aluminum Balconies delivered a turnkey solution at a competitive price point—with minimal maintenance for property managers. AS&D Product Scope: Railing and Balcony Systems Railing System / Infill: TR200 Flat Top / Picket Location: Enumclaw, WA Construction Type: Assisted Living / Retrofit

PATIO COVER PORTFOLIO Our patio cover portfolio showcases our previous projects, highlighting our expertise in creating beautiful and functional outdoor living spaces. From designs to modern styles, we have the experience to bring your vision to life. Flat Pan Flat Pan / Scallop Lattice Flat Pan / Miter Lattice Flat Pan / Scallop Lattice Insulated / Scallop Lattice PolyPanel PolyPanel PolyPanel / Scallop Lattice PolyPanel / Corbel Lattice Pergola / Bevel Lattice PolyPanel / Scallop Lattice V-Pan PORTFOLIO GALLERY Flat Pan Insulated Pergola Open Lattice Mixed Poly Panel V-Pan