SEARCH RESULTS

< Back Adjust-A-Body Extended Length Hanger Bolt Post Types: Sleeved Fitting Types: Tensioning, Swaging REQUEST A QUOTE This fitting is identical to the Adjust-a-Body® with Hanger Bolt except the extended length hanger bolt is 3” long. Designed to reach past sleeves and drywall to find the wood post or frame underneath. It is used for sleeved posts with an outside diameter of greater than 4-1/2”. Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must be purchased separately. CABLE DIAMETER PART NO. THREAD 1/8" CH-A-JB6-L CH-F-4 3/16" CH-A-JB6-L CH-F-6

< Back Cable Brace Connector Product Type: Cable Railing Accessory REQUEST A QUOTE Plastic plugs with screws for attaching to wood or aluminum frame and wood deck. PART NO. CH-CB-CONNECTOR

< Back 773 Series APPLICATION GUIDE Cable Kit Length: 30' - 60' REQUEST A QUOTE Post Type: Metal Inside-of-post to outside-of-post mount with one or two corners LEFT PART NO. RIGHT PART NO. CH-A-JTB6 CH-R-6-12 CH-PLST-4 / CH-PLST-6

< Back Adjust-A-Body With Toggle Post Types: Metal Fitting Types: Tensioning, Swaging REQUEST A QUOTE Exposed, swaged, tensioning, face-of-the-post-mounted fitting for use on level runs only. This fitting is ONLY available for 1/8” diameter 1x19 stainless steel cable. It can be used with any fitting on the opposite end of the run. The Toggle portion of the fitting is secured into a pre-drilled hole in the end post. No tapping is required! The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. Lock Nut is installed onto the Toggle first, followed by the body, secured onto the Toggle, creating tension on the cable. Once sufficient tension is achieved, the Lock Nut is secured against the body's end to prevent the fitting from loosening. Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must be purchased separately We do not recommend installing this fitting in pitched applications because it would require drilling all of the holes in the end post at an angle. While this is possible with special fixtures, if it is not done correctly the end result would be visually unacceptable. Note: A minimum hole diameter of 5/16" and a minimum post thickness of 1/4" is required. CABLE DIAMETER PART NO. 1/8" CH-A-J6-T2-4

< Back Push-Lock Turnbuckle Threaded Bolt Post Types: Metal Fitting Types: Swageless, Tensioning REQUEST A QUOTE The Push-Lock® Turnbuckle Threaded Bolt is an exposed, swageless, tensioning, face-of-the-post-mounted fitting that is suitable for level runs only, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable. The Push-Lock® Turnbuckle Threaded Bolt can be used with any fitting on the opposite end of the run. This fitting consists of four separate pieces: the threaded bolt, the body, the lock nut, and the Push-Lock® Stud. The short thread of the threaded bolt is secured into a pre-drilled and tapped hole in the face of the end post. The lock nut is installed all the way onto the exposed machine thread of the threaded bolt first, followed by the body. The Push-Lock® Stud threads into the body, and the cable attaches to the stud fitting via our Push-Lock® locking wedge system which requires no special tools. Tension is created by using the body as a turnbuckle. Once sufficient tension is achieved, the lock nut is secured against the body to prevent the fitting from loosening. The most likely application for this fitting would be when substantial take-up is required AND there is a preference for a swageless fitting, AND there is less than 2-1/2” of space available in back of the end post. CABLE DIAMETER PART NO. 1/8" CH-PL-TB-TB-4 3/16" CH-PL-TB-TB-6

< Back Cable Brace Connector (Stairs) Product Type: Cable Railing Accessory REQUEST A QUOTE Plastic plugs with beveled bottoms for attaching to wood or aluminum frame on a stair rake. PART NO. CH-CB-CONNECTOR-STAIR

< Back 272 Series APPLICATION GUIDE Cable Kit Length: 30' - 60' REQUEST A QUOTE Post Type: Metal, Wood Outside-of-post to outside-of-post mount with one or two corners. LEFT PART NO. RIGHT PART NO. CH-R-6-62 CH-PUL-4-12 / CH-PUL-6-12 FS-7/16-FLATW-18-8 FS-7/16-FLATW-18-9 CH-PLST-4 / CH-PLST-6

< Back 500-M Series APPLICATION GUIDE Cable Kit Length: 5' - 50' REQUEST A QUOTE Post Type: Metal Inside-of-post to inside-of-post mount for stairs LEFT PART NO. RIGHT PART NO. CH-A-JTB6 CH-PL-TE4 / CH-PL-TE6 CH-TT-6B CH-TT-6B CH-SC-6 CH-SC-6

< Back 7/16 SAE Washer Product Type: Cable Railing Accessory REQUEST A QUOTE We recommend placing a stainless steel flat washer between the fitting shoulder and the mating surface for the wood post. This will help protect the wood when you are tensioning the cable. PART NO. WASHER O.D. WASHER I.D. USED WITH HARDWARE FOR CABLE DIA. FS-7/16-FLATW-18-8 59/64" 31/64" 1/8", 3/16"

< Back Air Over Hydraulic Pump Product Type: Installation Equipment REQUEST A QUOTE Air driven. Powers Model 610 Swager. Requires an air compressor capable of delivering at least 5.8 CFM at 90 PSI and a minimum 20-gallon tank. Minimum 1/4” I.D. air hose with a 1/4” male pipe thread required (not included). PART NO. CT-HYD-PUMP-AIR

< Back Push-Lock Threaded Clevis Post Types: Metal Fitting Types: Swageless, Tensioning REQUEST A QUOTE The Push-Lock® Threaded Clevis is an exposed, swageless, face-of-the-post-mounted fitting that is suitable for level or pitched runs, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable. It is a more compact design than ourPush-Lock® Threaded Eye. The Push-Lock® Threaded Clevis can be used with any tensioning fitting on the opposite end of the run. This fitting is installed into a pre-drilled and tapped hole in the end post. The cable attaches to the body via our Push-Lock® locking wedge system which requires no special tools.While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the body of the fitting pivots at the clevis. CABLE DIAMETER PART NO. 1/8" CH-PL-CL-RP-4 3/16" CH-PL-CL-RP-6

< Back Anodized Aluminum Cable Brace Product Type: Cable Railing Accessory REQUEST A QUOTE 3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Holes pre-drilled at 3-3/16" on center, 13 holes total. For use between structural posts to keep cables code-compliant on level runs. Use cable brace plugs to attach to the top and bottom rail or deck. 3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Comes undrilled so slots can be field-drilled to match the cable array. PART NO. CABLE DIAMETER PRODUCT DESCRIPTION CH-CB-1-ANO 1/8" 3/4" x 3/4" x 42" No Holes CH-CB-2-ANO 1/8" 3/4" x 3/4" x 50" No Holes CH-CB-2D-ANO 1/8" 3/4" X 3/4" x 50" 3/16" Holes @ 3/16" O.C. CH-CB-3D-ANO 1/8" 3/4" x 3/4" x 42" 3/16 Holes @ 3/16 O.C.